Steel beams Gold Coast

Knocking out a wall, opening up a room or adding an extension? We fabricate the steel beam and posts to your engineer's design and install them on site.

Most Gold Coast renovations that remove a load-bearing wall or create a big opening need a steel beam. Your engineer (RPEQ) sizes the beam; we cut, drill, weld the plates and cleats in our workshop, then bring it to site ready to go in.

We supply and install universal beams (UB), parallel flange channels (PFC), lintels over doors and windows, and SHS or RHS posts with base plates. Beams can be primed, painted or hot-dip galvanised for outdoor and coastal exposure.

On install day we handle the lift — with our crane, dogging, rigging and EWP tickets — and work alongside your builder or carpenter so props come out on schedule.

Servicing all of the Gold Coast, Logan and South Brisbane — including Coomera, Pimpama, Ormeau, Helensvale, Southport, Nerang, Robina, Mudgeeraba, Varsity Lakes, Burleigh Heads, Palm Beach, Currumbin, Coolangatta, Tamborine, Beenleigh and Logan.

Pricing

What affects the price

Every job is different, so we price them one at a time. These are the things that move the number:

  • Beam size and length. A 3 m lintel over a window is a different job to a 7 m beam spanning a whole living room. Your engineer's size drives the steel cost.
  • Finish. Primer is standard. Paint costs a little more; hot-dip galvanising costs more again but lasts decades in coastal air.
  • Access. A beam that walks in through a wide opening is quick. One that has to go over a roof, through a window or down a tight side path takes longer and may need a crane.
  • Connections. Base plates, cleats, bolts and welded brackets all add fabrication time.
  • Propping and timing. Working in with your builder's props and schedule keeps the install tight.
How it works

How the job runs

Send the engineering

Email the structural drawings or a photo of them. No drawings yet? Tell us the opening size and we'll give you a ballpark.

Site check

For anything tricky we'll look at access before quoting, so the price holds.

Fabricate

Cut, drill and weld in our Gold Coast workshop, then prime, paint or galvanise.

Install

Delivered and lifted into place, working in with your builder or carpenter.

Common questions

Steel beams FAQs

How much does a steel beam cost on the Gold Coast?

It depends on the beam size your engineer specifies, its length, the finish (primer, paint or galvanised) and how hard it is to get into place. Send the engineering or a few photos and we'll give you an itemised price.

Do I need an engineer for a steel beam?

Yes. Structural steel must be designed by a registered engineer (RPEQ). If you don't have one yet, tell us about the job and we'll point you in the right direction.

Can you install the beam as well as make it?

Yes. We fabricate in our own workshop and install on site, including the lift.

Free quote

Get a price on your job

Tell us a bit about it — photos or plans help us price it faster. No obligation.

  • Local Gold Coast fabricator — own workshop
  • Clear, itemised quotes
  • Crane, dogging, rigging & EWP ticketed
  • Small jobs welcome

Rather talk? Call 0499 147 096

We only use your details to reply about your job. Never shared or sold.

📞 Call Wickham Steel